J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz

Description

EPOXY QUICK STTG COLD WELD 2OZ
Features and Functions:
Includes 1 fl. oz. of steel-reinforced epoxy and 1 fl. oz. of hardener
Easy to use, cures to dark gray, Use on automotive, brick, concrete, metal, Will set in 4-6 hours, and cure in 16-24 hours
Stong and nontoxic after it has set and temperature resistant up to 500F, Tensile strength is 3,960 PSI
Waterproof, petroleum, chemical, and acid resistant when fully cured
Can be drilled, tapped, machined, filed, sanded and painted
Description:
J-B Weld Original Cold-Weld Formula Steel Reinforced Epoxy
J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.
Use on:
Automotive
Brick
Concrete
Epoxy and Adhesives
Fiberglass
Metal
And more
Instructions
1. Prepare:
Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2. Mix:
Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
3. Apply:
Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry:
Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.
J-B Weld is proudly made in the USA
SKU# OR-043425826558
MFR# 8265S