Supermicro X9DRi-LN4F+ V1.20A Motherboard 2x LGA2011 IPMI 2.0 USA SHIPPED

Description

X9DRi-LN4F+ V1.20A Motherboard Only
**COMPATIBLE WITH E5-2600V2 CPU FAMILY**
Ask about our 1yr. Extended Parts Warranty additional
Listing comes with:
1x Tested motherboard
CPU and Memory used to Test the board to ensure sockets are protected during shipping.
Weight: 5.05lbs.
Physical Stats
Form Factor:
Enhanced Extended ATX
Dimensions:
13.68" x 13" (34.7cm x 33cm)
Processor/Cache
CPU
Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family
(up to 135W TDP)
Note: BIOS version 3.0 or above is required
Note:
Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache:
Up to 30MB
System Bus:
QPI up to 8 GT/s
System Memory
Memory Capacity
24x 240-pin DDR3 DIMM slots
Up to 1.5TB DDR3 ECC LRDIMM
Up to 768GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes:
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
Memory Voltage:
1.5 V, 1.35 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel® C602 chipset
AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® i350 Gigabit Ethernet (x4 ports)
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video:
Matrox G200eW
Input / Output
AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
SCU SATA
4x SATA 2.0 ports (3Gbps)
LAN
4 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
9 USB 2.0 ports total
(4 rear + 4 via header + 1 Type A)
Video
1 VGA port
Serial Port / Header
2 Fast UART 16550 ports: 1 rear and 1 header
DOM
1 DOM (Disk on Module) power connector
TPM
1 TPM Header
Chassis (Optimized for X9DRi-LN4F+ )
2U Chassis
CSE-216BE1C-R920LPB
CSE-825TQ-R740LPB
CSE-826BE1C-R920LPB
CSE-826E16-R920LP
3U Chassis
CSE-835TQ-R920B
CSE-836BA-R920B
Tower / 4U Rackmount
CSE-745TQ-R920B
CSE-846BE16-R920B
CSE-847E16-R1K28LPB
CSE-847E16-R1K28LPB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis
SuperServer(s) with X9DRi-LN4F+
Model(s)
SSG-6047R-E1CR36N
SSG-2027R-E1CR24N
SSG-6027R-E1CR12N
SSG-2027R-E1R24N
SSG-6047R-E1R24N
SSG-6037R-E1R16N
SSG-6027R-E1CR36N
SSG-6027R-E1R12N
SSG-6047R-E1R36N
Expansion Slots
PCI-Express
4 (x16) PCI-E 3.0 slots
1 (x8) PCI-E 3.0 slot
1 (x4) PCI-E 3.0 (in x8) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Management
Software
SuperDoctor® III
Watch Dog
NMI
IPMI 1.5 / 2.0
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
6+1 Phase-switching voltage regulator
FAN
8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
RoHS, Halogen Free
Operating Environment
Operating Temperature Range:
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range:
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range:
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range:
5% - 95% (non-condensing)
to see this stores favorite items in your eBay Feed
Visit store:
UNIXSurplusNet
See other items